The two-link mechanism serves to amplify angular motion. Link AB has a pin at B which is confined to move within the slot of link CD. If at the instant shown, AB (input) has an angular velocity of wAB = 2.5 rad/s, determine the angular velocity of CD (output) at this instant.

$The 40-ft-long A-36 steel rails on a train track are laid with a small gap between them to allow for thermal expansion. Determine the required gap & so that the rails just touch one another when the temperature is increased from T_{1} = - 20 deg * F to T_{2} = 90 deg * F . Using this gap, what would be the axial force in the rails if the temperature were to rise to T_{3} = 110 deg * F The cross-sectional area of each rail is 5.1i * n ^ 2$

The 40-ft-long A-36 steel rails on a train track are laid with a small gap between them to allow for thermal expansion. Determine the required gap & so that the rails just touch one another when the temperature is increased from T_{1} = - 20 deg * F to T_{2} = 90 deg * F . Using this gap, what would be the axial force in the rails if the temperature were to rise to T_{3} = 110 deg * F The cross-sectional area of each rail is 5.1i * n ^ 2

September 19, 2022

Header Ads Widget

The two-link mechanism serves to amplify angular motion. Link AB has a pin at B which is confined to move within the slot of link CD. If at the instant shown, AB (input) has an angular velocity of wAB = 2.5 rad/s, determine the angular velocity of CD (output) at this instant.

Post a Comment

0 Comments

Contact US

Search Question HERE.....

Ask your Question????????

Labels

Report Abuse

Popular Posts

the beam is subjected to a bending moment of M-20 kN. m, determine the maximum bending stress in the beam.

The joint is made from three A992 steel plates that are bonded together at their seams. Determine the displacement of end A with respect to end B when the joint is subjected to the axial loads shown. Each plate has a thickness of 5 mm.

Pages